In musical fountains or other fountain installations with dynamic elements water becomes lively with help from Vario switch systems.
The air for alternately switching (e.g. atmospheric pressure on and off) is supplied via the telescopic tube. Switchover time is flow dependent and cycles of 0.1 s are achievable. Please note: the operational range of the device is limited by the min. and max. flow rate als shown below.
This water switch is combined with a suitable nozzle and switches between two outputs - similar to a 3/2- way valve - almost without pressure loss and without water hammer effects in the lines. Normally one of those outputs is used as a pure bypass, however a second nozzle can also be mounted.
Technical Data
Flow rate Q min. | l/min | 85 |
---|---|---|
Flow rate Q max. | l/min | 325 |
Min. operating pressure | bar | 0.2 |
Max. operating pressure | bar | 3.0 |
Partice size max. | mm | 2 |
Pressure-side connection | 2", 50 mm / 2" | |
Power consumption | W | 8 |
Rated voltage | 24 V / DC | |
Rated current | A | 0.33 |
Power cable length | m | 2.00 |
Power connection type | Cable ends | |
Protection class | IP58 | |
Dimensions (L x W x H) | mm | 170 x 130 x 240 |
Material | Plastic / stainless steel | |
Net weight | kg | 4.36 |
Technical Details
Downloads
- Catalogue page
- Download
- Replacement list
- Mediaportal
- 3D drawing
- Mediaportal
- 3D drawing
- Mediaportal
- 3D drawing
- Mediaportal
- 2D drawing
- Mediaportal
- 2D drawing
- Mediaportal
- Bill of quantity
- Mediaportal
- Product data sheet
- Mediaportal
- Product instructions
- Mediaportal