VarioSwitch 010a / 24 V

In musical fountains or other fountain installations with dynamic elements water becomes lively with help from Vario switch systems.

The air for alternately switching (e.g. atmospheric pressure on and off) is supplied via the telescopic tube. Switchover time is flow dependent and cycles of 0.1 s are achievable. Please note: the operational range of the device is limited by the min. and max. flow rate als shown below.

This water switch is combined with a suitable nozzle and switches between two outputs - similar to a 3/2- way valve - almost without pressure loss and without water hammer effects in the lines. Normally one of those outputs is used as a pure bypass, however a second nozzle can also be mounted.

  • Characteristic

    • Dynamically variable water effect for musical fountains or interactive water effects
    • Effect switchover is virtually executed without pressure loss
    • Power-saving electrical valve technology
    • Stable construction and stainless steel side pieces
    • Four-core connection cable provided by others
    • Low maintenance in good water conditions
    • No-maintenance membrane valves

Technical Data

Flow rate Q min.l/min35
Flow rate Q max.l/min95
Min. operating pressurebar0.1
Max. operating pressurebar3.4
Partice size max.mm2
Pressure-side connection1", 25 mm / 1"
Power consumptionW8
Rated voltage24 V / DC
Rated currentA0.33
Power cable lengthm2.00
Power connection typeCable ends
Protection classIP58
Dimensions (L x W x H)mm150 x 120 x 210
MaterialPlastic / stainless steel
Net weightkg3.34

Technical Details


Catalogue page
2D drawing
2D drawing
3D drawing
3D drawing
3D drawing
Replacement list
Bill of quantity
Product data sheet
Product instructions