With the SplashCan, OASE is setting new standards across the board – in the operation, and above all in the efficient and precise installation, of Splash Deck fountain systems. Starting with the choice of material: The container is made of light, but extremely strong and durable plastic. This also provides a load capacity of up to 20 kN for the integrated version with the use of the SplashKit LED XL RGBW round or square. The required access points for water – including a flexible adapter with an easily accessible flow controller – as well as for power and DMX cables, are already pre-configured in the SplashCan. Depending on the situation on site, the cables can be connected from the bottom or from the side – and can be securely sealed by means of pre-installed adapters.
If the surrounding surface has not been worked exactly according to specifications, the SplashCan also proves flexible here: The variable water connection adapter allows the height to be adjusted up or down by 1.5 cm to achieve the correct installation position. The included installation cover, which also protects against contamination during installation, is helpful for accurately determining the height. Using the eye bolts on the outer ring of the Splash can, the containers can be firmly connected to each other by means of struts, and can be positioned at an equal distance.
|Connection||2", DN 75|
|Material||Plastic / stainless steel|
Socket wrench SplashCanShow accessory
SplashCore /DMX/02Show accessory
SplashCore NPT /DMX/02 [US]Show accessory
Orb NozzleShow accessory
SplashKit LED XL RGrBW round /DMX/02Show accessory
SplashKit LED XL RGrBW square /DMX/02Show accessory
SplashKit LED XL RGrBW recessed /DMX/02Show accessory
ProNect Transition BoxShow accessory
SplashKit Cover roundShow accessory
SplashKit Cover squareShow accessory
SplashKit Cover recessedShow accessory